Making your own dice Tower - another go!

I've decided to have another bash at making a dice tower - but this time it will be constructed from 3mm MDF and will be designed to be taken apart after each use.

I've looked at some acrylic and wooden designs and it looks like the best way to build it will be as follows.

1) 4 rectangles of 3mm MDF - one shorter than the rest.

2) Cut 3 to 4 slots in the two sides and 3 diagonal slots

3) Cut slight crenelations (?) into the front and back (the front being the shorter piece)

4) Create three tumblers - two with one short edge, one with two long edges (the exit ramp).  The short edge ones allow the dice to pass from one level to the other.  The exit ramp runs the dice onto the table.

The picture below hopefully helps you envisage the idea.

3mm MDF is on order.  Watch this space.